The new VAPORADA is an innovated Continuous Yarn Shrinking and Bulking Machine with independent heads suitable to shrink and bulk a very wide range of hand-knitting yarns with counts from Nm 0.5 to Nm 8. Thanks to its innovated heads, it is possible to obtain excellent results with a short steaming chamber. The new VAPORADA can be linked with cone or cake winders (spirowaps) according to the customer’s choice.
The yarn is layed in a particular “tube” shape on the woven belt and then conveyed into the steaming chamber. Here the steam acts both inside and outside the “tube”, shrinking and bulking the yarn (please see the attached photo). The steam is injected under pressure in the steaming chamber; when the preselected temperature is reached, the electric-valve closes the immission of the steam. Then the bulked yarn pass through the cooling zone and then is ready to be wound on cones or in cakes (spirowaps). A set of photocells sincronizes the VAPORADA to the cone or cake (spirowaps) winders.
✔ No. 4 Fully independent heads
✔ Possibility to work with ONE or TWO yarn per track.
✔4,3” or 7” TFT colour touch screen control panel that set
➔Speed of deposit (from 0 to 600 mt/min.)
➔Time of bulking from 20 to 300 sec. according to the characteristics of the yarn.
✔ All the parameters can be stored in 200 programs, so it is possible to recall them at will.
✔ Languages: English, Italian, Spanish, French, Portuguese, Russian, German. Chinese.
✔ Input and output creels with yarn tightener.
✔ Pneumatic infeed of the yarn.
✔ Cone holder.
✔ Steaming chamber with length of mt. 1,8 or mt. 2.7 with steam injection through steam valve with pneumatic command and new heating serpentine system for delicate yarn like angora and mixed yarn with cotton.
✔ Maximum bulking temperature: 98°C at sea level
✔ Possibility to work with ONE or TWO yarn per track.
✔4,3” or 7” TFT colour touch screen control panel that set
➔Speed of deposit (from 0 to 600 mt/min.)
➔Time of bulking from 20 to 300 sec. according to the characteristics of the yarn.
✔ All the parameters can be stored in 200 programs, so it is possible to recall them at will.
✔ Languages: English, Italian, Spanish, French, Portuguese, Russian, German. Chinese.
✔ Input and output creels with yarn tightener.
✔ Pneumatic infeed of the yarn.
✔ Cone holder.
✔ Steaming chamber with length of mt. 1,8 or mt. 2.7 with steam injection through steam valve with pneumatic command and new heating serpentine system for delicate yarn like angora and mixed yarn with cotton.
✔ Maximum bulking temperature: 98°C at sea level
✔ Yarn break control sensors.
✔ Electric steam generator with pressure from 5 to 7 bar.
✔ Electric steam generator with pressure from 5 to 7 bar.
✔ Voltage: 3-phase 230-400 Vac + earth (other voltages upon enquiry)
✔ Power installed: 3.0 kw
✔ Air pressure: 6 bar – Consumption 1 Nl/min
✔ Steam pressure required: from 5 to 7 bar.
✔ Color: Ivory white RAL 1013
CE Declaration of conformity (in accordance with 89/392 / CEE, 91/368 / CEE, 93/44 / CEE, 93/68 / CEE and IEC 60204-1).
✔ Power installed: 3.0 kw
✔ Air pressure: 6 bar – Consumption 1 Nl/min
✔ Steam pressure required: from 5 to 7 bar.
✔ Color: Ivory white RAL 1013
CE Declaration of conformity (in accordance with 89/392 / CEE, 91/368 / CEE, 93/44 / CEE, 93/68 / CEE and IEC 60204-1).